Not Yet Classified

This recall has not yet been classified by risk level.

Scubapro® Recalls MK 20 Scuba Regulators for Service

Date: October 2, 2006
Company: Scubapro® USA, of El Cajon, Calif.
Status: Ongoing
Source: CPSC

What You Should Do

Stop using this product immediately. Do not consume, use, or distribute it.

Scubapro® USA has been providing a service upgrade kit via the authorized dealer network since May 2005 which contains a Yoke or Din retainer that prohibits over-tightening during annual service. Consumers can easily identify if the service upgrade has been completed by counting the vents on the plastic saddle located on the regulator. If the service upgrade has not been completed, the consumer should bring the regulator to any authorized Scubapro® dealer to have the service upgrade completed free of charge.

Affected Products

The recall involves first stage regulators that are marked with the Scubapro brand and identified as the MK20.

Why Was This Recalled?

Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.

Where Was This Sold?

Distribution information not available.

About Scubapro® USA, of El Cajon, Calif.

Scubapro® USA, of El Cajon, Calif. has 1 total recall tracked by RecallDetector.

Related Recalls

Data sourced from the CPSC. Last updated March 26, 2026. View original report