Not Yet Classified

This recall has not yet been classified by risk level.

Lutron Recalls Power Interfaces for LED Tape Lights Due to Shock Hazard

Date: June 5, 2025
Company: Lutron Electronics Co. Inc., of Coopersburg, Pennsylvania
Status: Ongoing
Source: CPSC

What You Should Do

Stop using this product immediately. Do not consume, use, or distribute it.

Consumers should immediately stop using the recalled power interfaces and any connected lighting and turn off the power at the circuit breaker. Consumers should contact Lutron for instructions on how to receive their free replacement power interface and how it will be installed at no charge. Consumers should go to https://residential.lutron.com/us/en/safety/safety-recall to determine if their unit is included in this recall and, if so, to register to receive installation of the replacement power interface. If a unit is included, Lutron will provide the free replacement power interface and a pre-paid mailing label that the consumer can use to return the unit to Lutron. Options: Replace

Affected Products

This recall involves Lutron-branded power interfaces, model LU-PH3-B, intended for use with LED tape lights. The 96W hard-wired power interfaces were distributed alone and as part of Lumaris RGB+ tunable white LED tape light starter kits for RadioRA 3 systems (model RRL-MTK-RT-IN) and HomeWorks systems (model HWL-MTK-RT-IN).

Why Was This Recalled?

The power interface can fail during a significant power surge (e.g., lightning strike), posing a shock hazard to consumers if they touch the LED tape lights.

Where Was This Sold?

Distribution information not available.

About Lutron Electronics Co. Inc., of Coopersburg, Pennsylvania

Lutron Electronics Co. Inc., of Coopersburg, Pennsylvania has 1 total recall tracked by RecallDetector.

Related Recalls

Data sourced from the CPSC. Last updated March 26, 2026. View original report